WTB: NOS MK4/UMK3 Lexan Proctector for Control Panel

LeeWoo

Active member

Donor 3 years: 2023-2025 (Monthly Donor)
Joined
Feb 8, 2011
Messages
465
Reaction score
126
Location
Florida
Rating - 100%
18   0   0
WTB: NOS MK4/UMK3 Lexan Proctector for Control Panel

I'm looking to buy a NOS Mortal Kombat 4/Ultimate Mortal Kombat 3 Lexan Proctector for the control panel.
 
i have a few mk1 & mk2 that are nos that i could drill you run buttons, however mk4 has different spacing on the p1 & p2 buttons. Shoot me a pm if interested.
 
Thanks for the reply, but that won't work for me with the start buttons in the different positions.
 
Is there anyone that makes these or knows where I could get a blank sheet with the correct thickness?
 
I have always cut my own, and recently I have been getting them from estreetplastics.com, they have 1/8" all the way to 1/2" Lexan. Their prices are better than what I would get from the local hardware store anyway. Tracking your package with them is crap and they ship the stuff just sandwiched between cardboard, but it got there fast and scratch-less. I have also used them for Acrylic on a PC case, I hope they work for you, if you can't find an original. Good luck.
 
Hmmm, I was just measuring my originals and they're 1/16" not 1/8". I wonder how much of a noticeable difference that is while playing the game...
 
Why not just go to the local Lowes or Home Depot and have them cut you some lexan? I've done this for my arcades. After that you just have to drill the holes without cracking it.
 
Back
Top Bottom