WTB Nintendo Cocktail Parts

AndrewC

New member
Joined
Aug 10, 2010
Messages
6
Reaction score
0
Location
Kent, United Kingdom
Rating - 100%
1   0   0
Hi,

Looking for a set of clips for the top glass, coin box, original locks with keys, and Donkey Kong / Donkey Kong Jr Control panels.

A set of the PCB connectors chopped off of a wiring harness would be good too.

I'm restoring a converted Radar Scope to a Donkey Kong.

Also interested in any working / non working PCBs for Radar Scope or Donkey Kong Jr.

Thanks in advance, Andy.
 
Connectors

Dokert might have the correct connectors since he made Nintendo harnesses.

I have seen the Factory Radarscope to DK conversions in upright form. But you have a DK CT that was converted to a Raderscope? Never seen that one before.
 
Hi,

It was originally a Radar Scope cocktail, at some point in its life it has been converted to a Tekhan Guzzler (?!), and resprayed in green fleck paint. I'm converting it to a Donkey Kong as the cabinets are identical apart from the control panels and a slightly larger monitor bezel.

Sorry, should have been clearer in the original post:(

At the moment i'm using hacked up bits of IDE connectors to test a Donkey Kong four-board PCB in it, would be nice to have the proper connectors though.

Andy.
 
Back
Top Bottom