WTB: Neo Geo Cab parts (MV-ELA PCB and wires; memory card reader; coin box)

uiengineer

New member
Joined
Jul 22, 2016
Messages
9
Reaction score
0
Location
Illinois
Rating - 0%
0   0   0
WTB: Neo Geo Cab parts (MV-ELA PCB and wires; memory card reader; coin box)

EDIT with update:

I'm now just looking for the following wire connector:

otDiCek.jpg


It has two 8 pin connectors and a power connector (I think it's 2 prong, not sure).


Still also need that Memory Card sticker if anyone can create one or has a spare.

-------------------------------------------------------------------------------

Hey all. I'm looking for a few parts to restore my Neo Geo 4 slot.

First, I'm looking for the mini marquee control board (MV-ELA PCB) and the wires that connect from the MV-4F to the MV-ELA, and from the EL Panel to the MV-ELA.

Here is a picture of the PCB and one of the wires I need:
10432473173_fe69c79d0d.jpg


Next, I'd like to find the memory card reader and headphone jack for a 4 slot cab:
MemoryCardReaderSm.jpg

and maybe this too:
MemorySticker.jpg


Finally, I don't need to have this, but it'd be cool, the stuff needed to have an original coin box/mechanism working. I have the coin slots with some wires behind it, but nothing is inside the cab (and there is no lock/key for the coin doors). I'll post a pic of what I do have shortly.

Thanks all!
 
Last edited:
Mini MVS

I have a mini-mvs cab with a dual slot board. PCB needs a new battery, but everything else works fine. I put my single slot PCB in it to test. Someone had painted the outside black. Has a new 13inch monitor in it.
 
I found the MV-ELA and that wire as pictured. I still need the 8 pin wire connector to go on the other end of the mini pcb and the MVS mobo.

I found a memory card and harness, but I'm still looking for that memory card decal though.
 
Back
Top Bottom