WTB: NBA Jam Tournament Edition Artwork

Jedidentist

Well-known member

Donor 3 years: 2011-2013
Joined
Nov 17, 2009
Messages
3,113
Reaction score
30
Location
Sudbury, Massachusetts
Rating - 100%
20   0   0
Just picked mine up this weekend and I'm looking to redo everything. Mine isn't in bad shape, but everything is really faded, including the marquee, and my sides have some wood swelling at the base, so I'd like to replace it all. I've sent a note to gameongrafix to see what they have. Classicarcadegrafix has some stuff, but none of it really works for me. 2 of the decals might be nice for the monitor bezel, but $99 is ridiculous for 2 stickers that are a few inches wide. I really don't want to scan my whole machine, but I will if I have to. Thanks!
 
I have lots of NOS NBA art work. Not sure which versions but if you can snap a pic of your machine and send it to me, I can check next time I'm at storage
 
Here's a copy of the image from the auction I won:

eBayISAPI.dll


Derek

Edit: crap, that doesn't work...hate doing this with my iPad. He's the link:

http://cgi.ebay.com/ws/eBayISAPI.dll?VISuperSize&item=350450875780

Christ, even that doesn't work. How about this:

http://cgi.ebay.com/ws/eBayISAPI.dl...wLZXof0eziCsdbVCas%3D&viewitem=#ht_1978wt_922
 
Last edited:
Those would actually be fantastic! I know the side art is a pipe dream, and if I want it done, I'm going to have to figure out how to scan it. As for the CPO, that might even be easier to scan since I can just take the whole thing somewhere commercially and have it scanned. Let me know what you find!

Derek

BTW- if you happen to have any of the plastic coin chute covers for Midway coin doors, I'd be all over a set of those too! Like these:
IMG_155450.jpg
 
I do have a few sets of the plastic covers. They are not on the site yet but if you want a pair they are $23 mailed 1st class. I don't have the nuts that keep them on the door. :-(
 
Here's a copy of the image from the auction I won:

eBayISAPI.dll


Derek

Edit: crap, that doesn't work...hate doing this with my iPad. He's the link:

http://cgi.ebay.com/ws/eBayISAPI.dll?VISuperSize&item=350450875780

Christ, even that doesn't work. How about this:

http://cgi.ebay.com/ws/eBayISAPI.dl...wLZXof0eziCsdbVCas%3D&viewitem=#ht_1978wt_922

I think the side art looks fine on that machine. The cpo looks faded and the marquee probably needs to be replaced. Is the side art bad?
 
The bottom of it is junk. There's swelling and some chipping. The faded part really irks me as well. All of my games get a full restore...to the best of my ability given repro parts and art out there. If it's impossible, then I don't bother. However, since it doesn't look like anyone's ever done side art for this, I might end up trying to scan it all and have someone print it off for me.
 
Ok, scratch my above post saying I have the coin slot covers. What I thought was a bin full of these actually turned out to be the coin chute insert plastics.
 

Attachments

  • IMG_0677.JPG
    IMG_0677.JPG
    95 KB · Views: 9
Nice score. Those dedicated TE's don't come up that often. I sure do love mine. Congrats.
 
Nice score. Those dedicated TE's don't come up that often. I sure do love mine. Congrats.

Thanks. It happened to be only 50 min from my house, so that made the decision pretty easy. Price wasn't too bad either. I'm going to throw a JAMMA switcher in there and get some TMNT and Simpsons boards in there to. I just hate having non-minty looking games.
 
Thanks. It happened to be only 50 min from my house, so that made the decision pretty easy. Price wasn't too bad either. I'm going to throw a JAMMA switcher in there and get some TMNT and Simpsons boards in there to. I just hate having non-minty looking games.

I'm with ya. Mine has a little swelling about 2 inches up the sides. No fading, except the CP box. I actually traded it away to a buddy and then bought it back after deciding I could live with a little swelling. I have NHL 2 on 2 open ice in there with a switcher, too.
 
Anytime. Most difficult was getting the kick harnesses wired together with the diodes.
 
Back
Top Bottom