WTB NBA Jam TE stuff

joebunn

New member

Donor 2011
Joined
May 4, 2011
Messages
30
Reaction score
0
Location
North Carolina
Rating - 0%
0   0   0
I am primarily looking for a new header and the full side art. I currently have a faded header and just the NBA sticker on the side of my cabinet. Thanks!
 
I would be interested in seeing this as well. I'm sure the "kit" side art is just the sticker sheet to be added to black cabs? I would imagine it's not the full wood floor side art.
 
I am primarily looking for a new header and the full side art. I currently have a faded header and just the NBA sticker on the side of my cabinet. Thanks!

Im guessing you have a conversion? What kind of cab is it?
 
Jow, it says on the back it's Simpsons.

Yeah my first JAM cab was a Konami, too. Mame Marquees used to sell side art IIRC, but it wouldn't have fit the Konami cab. You might be SOL and just have to go with a black cab w/ NBA stickers :(
 
cab

Well, if I could get a decent scan of the cool one with the hardwood, my graphics guy/large format printer could create it for my size. He's the man! Heck, maybe I will just make up my own style and rock like that!
 
The past month or two a few of us have been discussing doing it. I think mine has the most intact sideart, but I don't have a scanner that I can remove the top off of and lay down. I also don't have computers powerful enough to handle piecing together all of the high resolution scans...even if I did do it. That being said, if someone was willing to do all of the graphics work after the scans were done (including piecing them together, etc.), I might be willing to buy an inexpensive scanner and do it in exchange for a set of art. It won't work for your cab, but if you filled in the small angle differences with the generic floorboard pattern, printed it as one big sheet, and then cut it to fit your cab, it would work...a lot of work, but it would work. That being said, I don't have any time to mess with mine until the Summer...too much stuff going on at home. I'm still praying someone finds some NOS sideart that can be scanned for the community. I already posted up the CPO.
 
Dude. Check this out. The place in the youtube video is in MA. Call them up. They could probably scan it in a half hour.


The past month or two a few of us have been discussing doing it. I think mine has the most intact sideart, but I don't have a scanner that I can remove the top off of and lay down. I also don't have computers powerful enough to handle piecing together all of the high resolution scans...even if I did do it. That being said, if someone was willing to do all of the graphics work after the scans were done (including piecing them together, etc.), I might be willing to buy an inexpensive scanner and do it in exchange for a set of art. It won't work for your cab, but if you filled in the small angle differences with the generic floorboard pattern, printed it as one big sheet, and then cut it to fit your cab, it would work...a lot of work, but it would work. That being said, I don't have any time to mess with mine until the Summer...too much stuff going on at home. I'm still praying someone finds some NOS sideart that can be scanned for the community. I already posted up the CPO.
 
This scanner is killer. The closest to me is in South Carolina. Plus, my cabinet just has stickers. Anyone near a Cruse Scanner? I will kick in on the cost of getting your cabinet scanned!
 
Back
Top Bottom