WTB: Monitor Bracket

JoeB1355

Well-known member
Joined
Dec 11, 2010
Messages
1,631
Reaction score
99
Location
Seymour, Tennessee
Rating - 100%
45   0   0
Here's what I need:
DSCF1548.jpg
 
Tempest cabaret if I am not mistaken.

I'll keep an eye out for one. The last time I needed one, I just had one made.

Scott C.
 
Where did you get 1 made? The metal is pretty thick probably twice as thick as what the power brick is made from
Most metal shops should be able to make this for you with just the dims. If you don't have them cut or round the end that attaches to the monitor, then it may also be cheaper.

Scott C.
 
Any clue as how to find a "metal shop" I found one place that did some work but haven't really been too response and I haven't really found any place else. Should I be look for some other type of business that might make metal parts?

And of course if some has one of these all the better
 
Any clue as how to find a "metal shop" I found one place that did some work but haven't really been too response and I haven't really found any place else. Should I be look for some other type of business that might make metal parts?

And of course if some has one of these all the better
I cannot speak for what is local to you. Fortunately for me, I already knew the metal shop existed since there were local. Not being sarcastic, but I would try the yellow pages and google for metal production, fabrication, repair, etc. Auto Body shops can also be a good source or point you to "general" metal fabrication places in your area.

High Schools (metal shop) can sometimes help if they are looking for good stuff to teach the kids (different projects).

Scott C.
 
I cannot speak for what is local to you. Fortunately for me, I already knew the metal shop existed since there were local. Not being sarcastic, but I would try the yellow pages and google for metal production, fabrication, repair, etc. Auto Body shops can also be a good source or point you to "general" metal fabrication places in your area.

High Schools (metal shop) can sometimes help if they are looking for good stuff to teach the kids (different projects).

Scott C.

Ok I'll try those I was looking for metal shop. I did car restoration place but they we're really interested. I tried and auto body shop no dice either. I'm sure there must be something around here just wasn't sure what type of business to look for. I was trying switchboard.com for my searches.

Thanks for the tips I'll see what I find
 
Back
Top Bottom