WTB: Millipede (Atari) Cocktail Access Panel

Guru-420

Well-known member
Joined
Nov 8, 2006
Messages
2,566
Reaction score
59
Location
Hubertus, Wisconsin
Rating - 100%
5   0   0
Hey guys, looking for a replacement for the missing control panel on my Millipede cocktail table. I am assuming this panel was used on more then 1 Atari cocktail table. I am specifically looking for the panel used to cover access to the power block/monitor connectors. Cover is approx 7" tall and 14" wide.

Someone PLEASE help me out on this, I am horribly challenged when it comes to woodworking and I would never be able to get the rounded corners correct. Guy I bought the machine from says he just needs to find it and will ship it to me (along with the centipede board and keys he couldn't find..which I doubt will happen), so I am going to just look for a replacement while I wait.
 
If its similar to centipede - there is a piece of flat stock that slides in from the top to act as a lock bar for that missing panel. You will need one of those as well - nice pickup .
 
I would email david and see if he has a file on them.

http://forums.arcade-museum.com/showthread.php?t=233297

I am not sure if millipede is the same as tempest, space duel, crystal castles, asteroids deluxe, or dig dug cocktail. They use a metal bar that pulls out to secure the door. You might be missing that too. You can probably add cam lock to the door to avoid having to find that bar and the brackets the door needs for the bar.
 
Last edited:
I would email david and see if he has a file on them.

http://forums.arcade-museum.com/showthread.php?t=233297

I am not sure if millipede is the same as tempest, space duel, crystal castles, asteroids deluxe, or dig dug cocktail. They use a metal bar that pulls out to secure the door. You might be missing that too. You can probably add cam lock to the door to avoid having to find that bar and the brackets the door needs for the bar.

Thanks, that was going to be my next step. I am missing the locking mech, but I really am not sweating that. I'm OK with just screwing the panel in place. It's not going out on route, I just don't want any kids reaching into the power transformer.

I contacted the guy that sold it to me. I'm going to wait a few more days, and contact DPTwiz if I need one cut.
 
Back
Top Bottom