WTB: Midway Space Invaders working PCB

board

I have one that i took out of a cocktail. I will check and see if the board is different from a upright board or if its dip switch or edge pin adjustable.
 
I believe the cocktail will work in the upright but the upright may not work in a cocktail, as the upright only version does not have the extra header connector for the second player...
 
It looks to me as if all boards will work in the upright model and only certain ones will work in the cocktail due to the 2 player capability..this is on brent radios space invaders page.

http://www.brentradio.com/SpaceInvaders.htm
Space Invaders Cocktails

Game logic boards A084-90700-739 B & C are used in uprights only.

Game logic boards A084-90700-739 D & E can be used in uprights & table models. All jacks are keyed and will plug in properly.

- From Bulletin 3/5/79
hope this helps you out
 
I have a couple SI boards that I need to finish repairing - they run now but when done they'll be single rom modded and all the sounds will work again.

At this point - Not sure when I'll ever get back to them but hopefully soon.
 
OMGWTFWOOT! I can has Invaders of Space!!!

My power board needed some work-

nuterpacman came through with a working boardset and through all of this, I've probably got some other working stuff!!

WOOT WOOT!

The ORIGINAL thump thump thump AND it's MINE- ALL MINE-

I am cranking this sucker UP and INVADING the SPACE of the storage building!!

Thanks to all who had support/advice!

Kerry

My son is about the same age I was when Space Invaders was new. Dudes- I'm telling you that when this came out, nobody had seen anything like it before.

Crazy
 
Back
Top Bottom