WTB: Midway coin door parts

[kspiff]

All I really need are 3 pieces: the metal coin entry slots that go on the front of the door (covering the hole and coin chute, 2x), and then there are 2 plastic pieces -- not sure what they are called, they just seem to channel the coin inserted from the coin chute into the mech and another one channels the coin past the coin switch's trip wire (1x set). Figured I would ask here before I break down and just buy another complete door to strip for parts (only $15-20, but then I'd just end up with more spare parts I don't likely need and deprive someone else of a complete one)..

Thanx.

 

[Greywolf]

Happ Controls

 

[kspiff]

Hm.. I will check again, but they seem to only sell Coin Control and Happ coin door parts.. nothing like what I need..

Oh, well.. $15 isn't all that much, I'll just give the rest of the door away somewhere later..

 

[kspiff]

UPD8: As expected, they don't have the parts at Happ (this is the old 80-82 circa door with the Bally/Midway plate on it, nobody makes NOS/repro stuff anymore AFAIK.. except the plate and light inserts..). I'll just get another, clean up the rest of it, and keep it for spare parts.. thanks, though -- I really wasn't expecting anything to turn up, anyways..

 

[Greywolf]

Oh... in that case you may have better luck contacting Steve Young at The Pinball Resource. I believe that all the coin doors where the Bally/Midway coin doors were the same back then.

 

[smalltownguy2]

I've got some Midway coin door parts if you're still looking.

 

[Shawn1976]

I also do.
Do you happen to have photos of what you need?

 

[TheEnglishTear]

One of the arcade sites offer them...I was thinking mikes arcade but didn't see.

 

[Mylstar]

This thread is 13 years old!

 

[thegleek]

why are we bumping 13+ year old threads for items that don't exist anymore by the OP?