WTB: Mario Bros Wire Harness

sk8ersublime

Well-known member
Joined
Mar 7, 2010
Messages
2,067
Reaction score
62
Location
Frederick, Maryland
Rating - 100%
24   0   0
I need to know what I need to hook up a Mario Bros board into my Wide Body cab that was converted to JAMMA. The control panel still have the original connectors as do the coin switches and lights.

Does anyone know what I will need? Mario bros is 44pin edge connector according to the manual, so if I just get a 44 pin edge connector from Bob roberts then I can wire everything myself using the schematics in the manual?

If anyone has a harness they want to sell at a decent price, please let me know.

Thanks!
Chad
 
Can I get all the connectors tho? I have everything to restore this cab, and all of the current parts have the original connectors, I would rather not replace them if I don't have to. If anyone knows what connectors i will need to purchase, I'll grab the harness from Bob.

Thanks in advance!
 
Oh and by parts I mean, CP coin door service switch speaker and video and just bought a pp7b power supply.

I don't have anything to connect the pcb to everything so I would need to know what molex I would need for everything
 
sorry i misunderstood. i though your cab was up and running with jamma wiring. i would use all original wiring. i dont have any mario bros harnesses. sorry.
 
It is wired jamma for double dragon, but I bought a original CP to replace the one that was hacked up. The video is wires jamma, but that's one cable I can just replace. There us currently a switching ps installed, so I just bought a nintendo ps. The only thing I don't have yet is the pcb and wiring.
 
Back
Top Bottom