WTB: Light Gun Cabinet with Working Monitor

pinbill

New member
Joined
Oct 23, 2015
Messages
25
Reaction score
23
Location
New York
Rating - 100%
3   0   0
I plan to put together a multi arcade pcb light gun cab and need a jamma light gun cabinet with a working 25" monitor for this project that can be picked up in the NY/NJ/CT area. I already have the game pcbs, switchers and working guns but need a cabinet in good structural condition (e.g. no water damage) with a working monitor and jamma harness. Anyone have something like that available?
 
Here in the Midwest they are around all the time. I would just mention that if I were you I would plan on servicing the monitor unless it was just done. I hear so many stories of guns not working and a primary cause is the monitor. Save yourself a future headache (especially since you already did so much prep work!).

Good luck!

P.S. if it was up to you, what cabinet would you want to go with? Area 51, Police Trainer....
 
Hey, thanks for the info — makes sense!

I actually have a working Carnevil arcade cab which I temporarily rewired to also work with a switcher and multiple light gun PCBs, but I really don't want to make any permanent changes to that cabinet which is why I'm looking for a cab I can dedicate to the multi. If I had my druthers I'd go for a Lethal Enforcers or Police Trainer cab, as I think those are a bit narrower than, say, the Area 51 cabs. (I'm pretty sure there's a setting to enable my non-LE boards to work in a mirrored cab like LE).
 
If you are willing to drive a little bit, Coinop Warehouse is in Hagerstown MD which is where I got mine from years ago, and he (used to at least) gets a lot of Maximum Force cabinets. It only took me a few weeks to get the one I wanted after I started looking.

It's also great for a multi light gun cabinet, as you will see if you look at the link in my signature.
 
Back
Top Bottom