WTB: Kortek K1-2-VO Horizontal Width Coil or Chassis w/ Working Coil

mhanlen1

New member
Joined
Jun 9, 2009
Messages
5,608
Reaction score
351
Location
Fallbrook, California
Rating - 100%
21   0   0
WTB: Kortek K1-2-VO Horizontal Width Coil or Chassis w/ Working Coil

The overscan on my 19" Kortek is bothering me. I would love to be able to see the whole image. I'm either looking for a working coil, or a whole chassis with a working one. The chassis doesn't need to be complete or anything, but preferably cheap because the coil is all I need.
 
That looks quite a bit different than mine. It looks like yours has a coil, but I can't be sure. You can see that the coil on mine doesn't have any copper wire around it. I don't know if it's missing or was never there. Does yours also look like this?


1943 Chassis by mhanlen1, on Flickr
 
i checked the board and its missing, you can see it in the picture. its supposed to be in the same spot as yours along the front row. i also have a board in my pole position and the width coil on that one is just like yours, no copper wires around it. you might just be better off replacing that board with something like a g07 that has ample parts to be found. i haven't seen many of the k1-2-vo versions floating around.
 
Back
Top Bottom