WTB: Killer Instinct PCB Repair

LyonsArcade

Well-known member
Joined
Feb 9, 2006
Messages
19,367
Reaction score
3,854
Location
Rock Hill, South Carolina
Rating - 100%
427   0   1
Anybody out there repair Killer Instinct pcb's? I've got one that has a sound issue, as well as a issue where it slows down and has choppy gameplay sometimes. It used to only do it about half the time (both issues at the same time), then eventually it got to the point where everytime it boots up now, there's no sound and the gameplay freezes for a half second or so while you're playing.

Anybody repair these?

Thanks!
 
Verify the eproms first then check the eprom jumper, make sure its in place and set on 4 meg. Also sounds like your hard drive my be taking a dump.
 
forgot to mention I've already done away with the hard drive and put the flash drive on it, checked the eproms I've gone about as far as I can go with this thing
 
Chad at Arcadecup Might be able to help you, he's got my board right now. Pretty sure he's on this forum somewhere too.
 
do you have a fan blowing on the CPU heatsink (with-in 18")? and have you tried a different hard drive/compact flash?
 
Back
Top Bottom