Anyone have one of these??? Trying to get a monitor operational. thx.
Found or No Longer Wanted WTB: k8000 remote board
- Thread starter LittleLarrySellr
- Start date
what does it look like?
FS Parts: - 70+ Remote Boards for CRTs
All untested. If it's in the photo (mount, cable etc) it's included. If it's not in the photo I don't have it. I do not know which monitors these are for, I bought them in bulk a long time ago and just got around to cataloging to make it easier to sell without digging through 70 boards for 10...
forums.arcade-museum.com
OP
OP
I have no idea what it looks like. However, I found some intel thanks to @security0001 -> https://www.arcadepartsandrepair.co...19k8304-series-monitor-cap-kit-105c-nichicon/
Thankfully Peter documented the part number as remote PCB is P737 and 85X0396-001
I looked thru your stash. I don't think you have this model number. Bummer.
Though, once I searched for the part number Peter listed, I found an ebay offering for a trashed chassis with that PCB! $48 bucks plus shipping I am gonna give it a shot.
This is a pic of the PCB APAR mentioned if for any reason some other crazy person in the future is searching for a K8000 remote pcb:
Thankfully Peter documented the part number as remote PCB is P737 and 85X0396-001
I looked thru your stash. I don't think you have this model number. Bummer.
Though, once I searched for the part number Peter listed, I found an ebay offering for a trashed chassis with that PCB! $48 bucks plus shipping I am gonna give it a shot.
This is a pic of the PCB APAR mentioned if for any reason some other crazy person in the future is searching for a K8000 remote pcb:
Hi,
I am working on bringing back to life a WG19K8304 "safety monitor" and need a pot for the remote PCB 85X0396-001 P737.
I spent about an hour Googling and got as close as a U3000 manual which actually lists the remote board but no specs!
Can you please tell me the required pot for VR704 (H-size) and also verify VR603 (V-cent) it looks a but fishy......
Thank you in advance and I hope you can help.
Jeff
I am working on bringing back to life a WG19K8304 "safety monitor" and need a pot for the remote PCB 85X0396-001 P737.
I spent about an hour Googling and got as close as a U3000 manual which actually lists the remote board but no specs!
Can you please tell me the required pot for VR704 (H-size) and also verify VR603 (V-cent) it looks a but fishy......
Thank you in advance and I hope you can help.
Jeff
Attachments
Started separate thread:
WG19K8304 "Safety Monitor" Remote PCB 85X0396-001 AKA P737
Hi, I am working on bringing back to life a WG19K8304 "safety monitor" and need a pot for the remote PCB 85X0396-001 P737. I spent about an hour Googling and got as close as a U3000 manual which actually lists the remote board but no specs! Can anyone please tell me the required pot for VR704...
forums.arcade-museum.com
OP
OP
What do you need? I can grab a Pic of the remote board if that helps?
