WTB: K7500 Chassis - Dead (repairable) or Alive

rturb0

New member
Joined
Mar 9, 2008
Messages
1,955
Reaction score
4
Location
Ohio
Rating - 100%
24   0   0
I just picked up a Cruisin USA with a K7500 tube and a P805 remote board but no chassis.

Sad part is I just sold my last K7500 a few months back and now I need one!

Let me know what you got and how much you want!
 
Get the right model of K7500 chassis or you'll be sorry...

Some 7501s match with certain tubes, 7502s match with other tubes.

The wrong combination will give you a terrible picture.

Mine likely got repaired from one into the other and that's all she wrote for that chassis.
 
I no longer need a chassis. I bought one off a fellow KLOVr but before it arrived I discovered my GT 2005 had a K7501 in it on a 27" tube (huh?)

I pulled the 7501 for the cruisin USA and bought a Silver Strike cab off a customer with a D9200 in it to use in the now vacated Golden Tee.

Thanks to those of you who offered to sell me one!

R
 
Yeah, 7501 with a 27" tube is what I had.
 
The chassis is the same for the 25" and 27" tubes. The only difference is the addition of the pincushion PCB in the middle of the board to the left of the vertical IC.

Someone had a good chart that showed which yoke was for the 7501 and which was for the 7502.
 
Someone had a good chart that showed which yoke was for the 7501 and which was for the 7502.

I've got some numbers written down somewhere for a 7501 yoke and a 7502 yoke, but I'm pretty sure I've seen multiple yoke numbers for each...
 
Back
Top Bottom