WTB: K7000 19" Daughter Board/RemoteBoard

disjaukifa

New member
Joined
Nov 9, 2011
Messages
2,837
Reaction score
31
Location
Ridgeway, Virginia
Rating - 100%
82   0   0
Hey Guys,

I need a Daughter Board/Control Board for a 19" K7000, technically I believe its a K7400, I just need it to be for a 19" monitor. Please send me a message if you have one!

Thanks
Disjaukifa
 
The 7400 series uses a different remote board than the 7000 series (7400 is not part of the 7000 series).

The 7400 did not come in a 19" version (to my knowledge).

Edward
 
Thank you Edward, I'm sorry I meant 7200, not 7400!

7200 is not part of the 7000 series, either;). Wells-Gardner was very intent on making things confusing.....hell, there's a 7201 and a 7203......totally different chassis. Wells used a handful of different remote boards. They are no all the same....so you have to make sure you get the correct remote board for your chassis.

Edward
 
Looks like the 7203 uses a P832 remote board and the 7201 uses a P758.
I got these numbers off the schematics.....so, take it for what it's worth.
The couple regular 7000 I have in the shop have P802 remote boards (though the schematics show P623:rolleyes:)

Edward
 
Looks like the 7203 uses a P832 remote board and the 7201 uses a P758.
I got these numbers off the schematics.....so, take it for what it's worth.
The couple regular 7000 I have in the shop have P802 remote boards (though the schematics show P623:rolleyes:)

Edward

Hey Edward,

Where is the model number located on these chassis?

I want to make sure I get the right thing!

Thanks
Grant
 
Hey Edward,

Where is the model number located on these chassis?

I want to make sure I get the right thing!

Thanks
Grant

There's usually a sticker on the metal framing.....though, they do fall off and get lost. When in doubt....too up a picture.

Edward
 
Back
Top Bottom