WTB: Ice Cold Beer, ICB , Zeeks Peak Coin door

sorhp

Active member

Donor 2013
Joined
Apr 16, 2013
Messages
1,176
Reaction score
22
Location
Texas
Rating - 100%
12   0   0
Hi,

My Ice Cold Beer is missing its 2 coin doors, the upper and lower, please help me find another

Im also missing the metal part that hugs the rubber belts ( I need 4 of them (2 for 2 different games))

thank you

EDIT: they are the Taito versions, not the coinco version.

I fabricated the metal part that hugs the rubber belts, no need for those any longer.
 
Last edited:
these games came with 2 different types of doors
do you bneed the coinco variant or the taito variant
 
Ok, I need the taito version
 

Attachments

  • C8E46229-31C6-491D-9C29-75EBEBE7A151.jpeg
    C8E46229-31C6-491D-9C29-75EBEBE7A151.jpeg
    1.8 MB · Views: 6
  • D8CC0413-184D-48D6-811F-75C63DA6A35B.jpeg
    D8CC0413-184D-48D6-811F-75C63DA6A35B.jpeg
    5.2 MB · Views: 5
  • 9EB9DE8F-83C7-493B-A51D-A76F89A94395.jpeg
    9EB9DE8F-83C7-493B-A51D-A76F89A94395.jpeg
    5.7 MB · Views: 6
  • 2ABB455D-9C69-41F7-806F-29C37AAA0615.jpeg
    2ABB455D-9C69-41F7-806F-29C37AAA0615.jpeg
    4.9 MB · Views: 6
  • 211BB98C-5545-4A2F-BC77-52FF490311E6.jpeg
    211BB98C-5545-4A2F-BC77-52FF490311E6.jpeg
    5.1 MB · Views: 6
Looks like I need these two doors
 

Attachments

  • AAC515A5-04DB-417A-BB88-E3F61B83CC23.jpeg
    AAC515A5-04DB-417A-BB88-E3F61B83CC23.jpeg
    229.3 KB · Views: 15
I never knew there were two versions. Is there a backstory on the difference, or a reason behind the change?
 
possibly 2 different manufacturers , Ive noticed some parts are different sizes between the 2 different builds. Im currently working on 2 machines at the same time and they both have a major difference in coin doors and small differences on some metal parts internally. unless its the same manufacturer from different years as parts changed
 
61302937-FF7D-4474-949C-2DB4F8A3709E.jpeg
I have an extra coin door like this one.. with the raised Taito, but not 100% yet on selling…


possibly 2 different manufacturers , Ive noticed some parts are different sizes between the 2 different builds. Im currently working on 2 machines at the same time and they both have a major difference in coin doors and small differences on some metal parts internally. unless its the same manufacturer from different years as parts changed
 
That's a sweet looking coin door. I haven't seen that one before. I never knew there was so many variations on these.

This is what my coin door looks like:

zeke.jpg
 
don't tease me bro, LOL. If I go the route of a different door single, then I'll need to cut a bigger hole in the front of the cab and make a plate for the coin box hole. I'd really like to exhaust all options on getting an original set before going that route :)
 
Back
Top Bottom