WTB: ICB or Zeke's Peak Motor (for the band)

I just got a few sample motors in the other day. I will be offering a rebuild service as soon as I find a good source for the motors. I have one that looks promising and will be pulling my ICB out in the next day or so to check it out.
I did one a while back for someone but it was a motor I had on hand. Be patient, I will be taking orders on these soon.....probably within the month.
 
I have a box with at least 2 NOS motors and 1 NOS ball somewhere. I'll see if I can find them.
 
I have a box with at least 2 NOS motors and 1 NOS ball somewhere. I'll see if I can find them.



I just remembered I had the old motor from the last one I repaired. I pulled it out and started measuring. The replacment motor I have looks like its going to work great. The only difference is the original shaft is knurled and the new motor has a D flat on it. I think I will pull my machine out tomorrow and test fit this motor. If I have to I can cut some new gears on the lathe. Im pretty sure I have the correct size gear stock here.
 
Last edited:
I just tested my sample motor and its a direct replacment but the shaft is flatted instead of knurled. Although the gear goes on really easily it never slips during operation. However, im positive I have found the exact same motor with the correct shaft and will be ordering those. Good news people, a replacment motor will finally be available for your ZP and ICB's.
I should have these ready to ship within a week.
 
Can you put up the direct link? Whats the price + shipping gonna be?
and are these just plug and play?

thanks!

Jon


http://www.pacmandotcom.com/catalog/13

Direct replacment but you will have to swap the gear from the original. Im going to see if I can find or make the gears at a decent price but for now im offering them without a gear.
Shipping should run $5-$8 in the US depending on where you are.
 
Nice work, Happ sells replacements for $30 each. They had a hard time guarenteeing they would work, and would not refund my money if they did not, wierd, so I passed, ......... order sent in..........thanks and great timing sir!!
 
Back
Top Bottom