WTB HN482764G EPROM (DK JR,DK3? etc)

Have a TMS2764-45 that would work what file do you need written to it?
 
Not sure yet which one it is as I am not home looking at it but I *should* be able to write it on my Williem G4x usb eprom writer right?

What other eproms are compatible with the DK JR? How can one tell?
 

Attachments

  • dkjr.jpg
    dkjr.jpg
    104 KB · Views: 10
A 2764 won't fit in that socket. It's only 36 pin, and a 2764 uses a 40 pin. It doesn't matter anyway, as I don't think anything goes in that one. It's supposed to be empty. Not sure why they would put one on there like that and not use it, but if you look at the PCB pic of a DK Jr at crazykong.com, that one is empty.
 
2764 is not 40 pin, its 28 pin.

That picture above looks like a DK3 pcb to me.
Im not sure if that empty socket should be populated on a DK Jr. If I can find some of my boards I will take a look.

Duh, you're right....don't know what I was thinking, as I even went and looked at one of my bootleg DK Jr boards (which is laid out almost identical to a real one) before I posted. The 2716/2732's have 4 less pins than the 2764's, so they're only 24 pin (this time I actually counted them :D ) Anyway, on my bootleg boards, they have that spot marked for an EPROM, but don't actually have the socket there. My other 2 single bootleg boards (which are laid out differently, since everything is on one board) even have the same arrangement. 3 2764's, and an empty 24 pin socket next to it.
 
Back
Top Bottom