WTB: Happ Light GunsX2, or Namco recoil GunsX2

Magog

New member
Joined
Jan 22, 2002
Messages
2,242
Reaction score
69
Location
Muskego, Wisconsin
Rating - 100%
36   0   0
So I have been screwing with my point blank trying to get it working.

The guns still work intermitantly.

I have repalced both Power supplies, the gun PCB, and rewired the whold damn game.

I had the guns tested on someone elses point blank and they worked fine, but it wasn't a real long test.

I am out of ideas at this point.

Unless someone has a great idea I guess I am looking for a Point Blank board, or two new guns.
 
point blank

Have you tried to increase monitor contrast and brightness? If you have a dim picture that is your problem unless of course the input ic for the guns is breaking down. You might have to rejuve the tube.
I believe i have a board but i will check.
 
Have you tried to increase monitor contrast and brightness? If you have a dim picture that is your problem unless of course the input ic for the guns is breaking down. You might have to rejuve the tube.
I believe i have a board but i will check.

The monitor is near perfect. When I squeeze the trigger they will sometimes fire and sometimes not. The way it generally happens is I power it on they work, and will continue to work until I turn the game off. If they aren't working they won't start working without a power cycle of the game.

When I go into calibration mode when they aren't working I get no red dot to line up with. When they are working in the calibration mode I get a red dot.

I have checked all the wiring and voltages etc and they seem to be fine, and well I replaced everything else in line other then the guns/board.

I assume it is a gun issue first and foremost, from my computer building experience power cycling will fix failing hardware temporarily, but at this stage I asssume it also could be the board. If I can get a board for a decent price I can rule that out and they end at the guns.

If anyone has any guns for sale great, I am not looking to pay happ controls 160+ for two guns, if i dont have to.
 
I have 1 HAPP gun that works great. I would have 2 but I am still trying to find me another sawed off shotty for my CarnEvil. $45 shipped and it's yours if your interested.
 
Back
Top Bottom