WTB Gauntlet board mounting plate

jfruge

New member
Joined
Oct 9, 2008
Messages
866
Reaction score
1
Location
Turlock, California
Rating - 100%
4   0   0
I am looking for the mounting plate for a Gauntlet Legends Dedicated pcb. If the price is right I would buy the board set as well. The one that I an after has a 90 bend @ the end and the fans are connected to the (small bent tend)

Thanks,

John Fruge
 
Guys, I am still looking for a mounting plate or plate + boardset. I need the plate that has a 90 bend about 4" from the end and the 2 fans are mounted pointing down on the video card.

Thanks,
 
Are you sure it's not 1 fan blowing down on the graphics card?
 
As far as I know there's 1 fan blowing down on the video card and 1 fan blowing across the cpu card.

Someone else will have to confirm, I guess.
 
I've seen them both ways. I have one where its two blowing across and another where its one on top and the other on the side.
 
This is the mounting plate I am after. With our without any boards.

Thanks,
 

Attachments

  • plate-8-31 001.jpg
    plate-8-31 001.jpg
    96.8 KB · Views: 17
Back
Top Bottom