WTB Galaga UR Cab/Project (Michigan-ish)

SgtSmackaho

Well-known member
Joined
Feb 17, 2010
Messages
1,692
Reaction score
54
Location
Michigan
Rating - 100%
13   0   0
Looking for a Galaga cab (project with a monitor ok as well)
Im located in SE Michigan
Have a nice DKjr project as trade (+/- cash) if interested
Has a new Dokert harness
Included are random Nintendo spare parts such as
Populated Vs CP
Partially working DK3 boardset (character issue bad rom?)
two farad cages
Donkey Kong Bezel
 

Attachments

  • IMAG0352.jpg
    IMAG0352.jpg
    95.5 KB · Views: 21
  • IMAG0342.jpg
    IMAG0342.jpg
    101.7 KB · Views: 19
  • IMAG0355.jpg
    IMAG0355.jpg
    93.6 KB · Views: 13
Last edited:
I might be interested in the DKjr by itself. Can you a PM me how complete it is and a price, and maybe a few pics? Bahh, i didnt even see your pic. Besides molding, does it need anything else?
 
I might be interested in the DKjr by itself. Can you a PM me how complete it is and a price, and maybe a few pics? Bahh, i didnt even see your pic. Besides molding, does it need anything else?

pm sent ...............................................................................................
 
He wants $500 for this on CL... Not worth 500.. maybe 300.... I offered him 300 wouldn't take it. Told me there was problems with sound and orange peel on paint. means you have to strip all the paint off and sand, prime and re-paint. 30 hours worth of work. $20 for t-molding if you can get it on. Else he would have bought t-molding and done it. He also said he did bondo work on the cabinet. I think its still only worth $300.
 
He wants $500 for this on CL... Not worth 500.. maybe 300.... I offered him 300 wouldn't take it. Told me there was problems with sound and orange peel on paint. means you have to strip all the paint off and sand, prime and re-paint. 30 hours worth of work. $20 for t-molding if you can get it on. Else he would have bought t-molding and done it. He also said he did bondo work on the cabinet. I think its still only worth $300.

Let's do a little math and see what it is worth (potentially)
Sanyo 20EZV $150
DKjr Boardset $85
Dokert/Flagg wiring harness $75
Power Brick $35
Control Panel $50
Coin Door $35
Bezel $40
Marquee $15
Cabinet $50

Looks like roughly $535 to me. I would have to say that your attempt at being the KLOV Price Police is a fail. Get off the guy's nuts, he doesn't have to take your lowball offer if he isn't interested.
 
Back
Top Bottom