WTB G07-CA0 Frame

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Rating - 100%
114   0   0
I have a nice CA0 monitor (the wide G07 chassis) but the frame is incomplete. I am missing the brackets that connect the tube frame to the chassis frame. Both are just attached to a board in the cabinet, meaning I can't use this monitor in any other machine without rigging some home-made board of my own. Thanks.
 
can you post a picture of it--I will look in my pile of parts--if I have it--you can have it for FREE --just pay for shipping--THANKS
 
I think you want the metal part that the g07 CAO chassis attaches to(not the sides). If so I just saw one yesterday. Its on badly burnt tube, So I don't mind letting it go. You want for the horizonal mount.

The middle metal part in this pic..(not a pic of mine)

9744_1_fs.jpg
 
I see what the deal is. They separated the tube from the frame, mounted the frame to the back of the board, and the tube to the front. I just need to remove the board and remount the tube to the frame. Guess I am not missing anything. Thanks.
 
Back
Top Bottom