WTB: Full Jamma Harness for Capcom Bowling

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,391
Location
Avon, Minnesota
Rating - 100%
114   0   0
I want something that is plug n play with a switcher and the trackball/ control panel mainly. I had an old hacked one, but it was from a Pac Man conversion and quite frankly a nightmare that had been converted, cut, spliced, re-cut, circumcised, fucked, etc, more than once. I just want a clean harness that I can plug the board, the trackball, a switcher, the buttons, the video, sound and the coin/service panel into and the game will work. I don't care what molex connectors the various parts of the harness terminate in, as I can change/add those.
 
A standard JAMMA harness will work just fine, you just need this key:

Code:
                  CAPCOM BOWLING

PARTS SIDE                         CKT SIDE
------------                       ------------         

  1   GND                           A  GND
  2   GND                           B  GND
  3   +5V                           C  +5V
  4   +5V                           D  +5V
  5   -5V                           E  -5V
  6   +12V                          F  +12V
  7   KEY                           H  KEY
  8                                 J        
  9                                 K              
 10   SP +                          L  SP-
 11                                 M
 12   VID RED                       N  VID GN
 13   VID BL                        P  SYNC
 14   VID GND                       R  SVC
 15                                 S
 16   COIN 1                        T  COIN 2
 17   1 START                       U  2 START
 18   PL 1 X DIR                    V  PL 2 X DIR
 19   PL 1 Y DIR                    W  PL 2 Y DIR
 20   PL 1 X CLK                    X  PL 2 X CLK
 21   PL 1 Y CLK                    Y  PL 2 Y CLK
 22   PL 1 HOOK LEFT                Z  PL 2 HOOK LEFT
 23   PL 1 HOOK RIGHT               a  PL 2 HOOK RIGHT
 24                                 b
 25                                 c 
 26                                 d 
 27 GND                             e  GND  
 28 GND                             f  GND  

 DIP SW A   1    2    3    4    5    6    7    8
 --------     NO DIP SW    USE SOFTWARE


Compare that to standard JAMMA:

Code:
            Solder Side            |             Parts Side
               GND             | A | 1 |             GND
               GND             | B | 2 |             GND
               +5              | C | 3 |             +5
               +5              | D | 4 |             +5
               -5              | E | 5 |             -5
               +12             | F | 6 |             +12
             - KEY -           | H | 7 |           - KEY -
        Coin Counter # 2       | J | 8 |      Coin Counter # 1
       Lock Out Coil # 2       | K | 9 |     Lock Out Coin # 2
           Speaker (-)         | L | 10|         Speaker (+)
                               | M | 11|
          Video Green          | N | 12|        Video Red
          Video Sync           | P | 13|        Video Blue
         Service Switch        | R | 14|        Video GND
           Tilt Switch         | S | 15|          Test Switch
         Coin Switch # 2       | T | 16|        Coin Switch # 1
           2P  Start           | U | 17|          1P  Start
           2P  Up              | V | 18|          1P  Up
           2P  Down            | W | 19|          1P  Down
           2P  Left            | X | 20|          1P  Left
           2P  Right           | Y | 21|          1P  Right
           2P  Button 1        | Z | 22|          1P  Button 1
           2P  Button 2        | a | 23|          1P  Button 2
           2P  Button 3        | b | 24|          1P  Button 3
                               | c | 25|
                               | d | 26|
               GND             | e | 27|             GND
               GND             | f | 28|             GND

As you can see the trackball hooks up to up, down,left,right on a JAMMA harness. Just buy a JAMMA harness from Bob Roberts.
 
Back
Top Bottom