WTB: Frogger parts

jimbodeanny

Well-known member
Joined
Oct 24, 2004
Messages
4,528
Reaction score
874
Rating - 100%
13   0   0
1 )I'm still hunting for a coin door (or just some replacement parts) for my Frogger.

Information about the coin door I'm looking for is here: http://forums.arcade-museum.com/showthread.php?t=132805


2) I'm also looking for an original konami-style 36-pin Frogger PCB. The one I have is a 36pin style bootleg board that plays great. The only difference is that at the title screen, the frogs spell "Frog" instead of "Frogger." I need an original board because I want to install the high score kit and it doesn't work on this PCB.


3) Lastly, I'm looking for the grommet for the joystick. I have an original Frogger joystick and need the centering grommet. I have an extra Ms. Pac grommet, but it's just a tad too big in diameter.
 
The joystick should be a standard wico.

Didn't Frogger use those "small" Wico joysticks...a la Scramble, Super Cobra, Vanguard, etc.....as opposed to the "regular" size Wico...a la Dig Dug, Xevious, Kangaroo, etc.

To jimbodeanny,
$100 shipped for a working (30 day warranty) Konami Frogger motherboard and a NOS grommet.
If you wanna to do this, I need to know what size of stick you have so I can sent the right grommet.

Edward
 
Didn't Frogger use those "small" Wico joysticks...a la Scramble, Super Cobra, Vanguard, etc.....as opposed to the "regular" size Wico...a la Dig Dug, Xevious, Kangaroo, etc.

To jimbodeanny,
$100 shipped for a working (30 day warranty) Konami Frogger motherboard and a NOS grommet.
If you wanna to do this, I need to know what size of stick you have so I can sent the right grommet.

Edward

Just got a hold of a Frogger board.

Still looking for the coin door/parts as well as a grommet. Elutz, the NOS wico joystick I have is the smaller/thinner one. I think it's like 4" in length but it's pretty skinny. I can measure the diameter of the shaft if that's what you need. How much would want for just the grommet?

Thanks!

-Jim
 
The thin wico joystick I've got is roughly 7/32 of an inch (5.6mm), measuring from the bottom of the shaft.
 
Back
Top Bottom