WTB: Donkey Kong Cables

clanggedin

Member
Joined
Nov 27, 2004
Messages
612
Reaction score
3
Location
Salem, Utah
Rating - 0%
0   0   0
I am looking for the cable that connect to "Main", "Coin", and "Counter" on the DK board. The "Main" cable is 20 pin I believe.

Mikes Arcade nor AS sells these and I cannot find another source for these cables.

Thanks,

Scott
 
Bob Roberts sells the cables.


I am looking for the cable that connect to "Main", "Coin", and "Counter" on the DK board. The "Main" cable is 20 pin I believe.

Mikes Arcade nor AS sells these and I cannot find another source for these cables.

Thanks,

Scott
 
You can make your own,if you can't find the ones you need.
Mouser,Mikes Arcade and Jameco sell the .100 connectors and pins.
Mikes are a bit more expensive though.
The connectors are not the exact same,but they work just fine.
I replaced a connector on a CP harness with one.
If you have a manual ,it has a wiring diagram that shows what every wire is for.
 
I spoke with Kim at Mike's Arcades and they said its the wiring harness that I need. Monday bump.

Yes...and like I posted earlier,you can make your own harness with the connectors and pins that Mike has.
You just need the schematic in the manual,the wire and the needed connectors and pins.
For the main harness you need 1 ea. 20 pin connector,it will need to be cut to fit the board. You also need 2 ea. 10 pin connectors for left,right,jump,plr 1,plr2 and ground. Also you will need 2 ea. 3 pin connectors for up,down and ground if you want it like original.
Another option is to use 3 20 pin connectors and wire everything to them and omit the 3 pin connectors.
The same can be done for the coin and counter using a 2 pin for coin and a 5 pin for counter.
Here are a couple pics that might help.
Schematic.
attachment.php


Main Harness.
attachment.php


Coin counter,mech and service switch harness.
attachment.php
 

Attachments

  • IMG.jpg
    IMG.jpg
    89.3 KB · Views: 21
  • DSCN0166.jpg
    DSCN0166.jpg
    90.2 KB · Views: 22
  • DSCN0167.jpg
    DSCN0167.jpg
    89.7 KB · Views: 21
Last edited:
Back
Top Bottom