WTB: DK upper PCB L-bracket mounts

vader1979

Well-known member

Donor 2021, 2023
Joined
Dec 13, 2011
Messages
2,081
Reaction score
80
Location
bismarck, North Dakota
Rating - 100%
32   0   0
I need both L-bracket mounts to hold the upper part of my DK PCB. If u have the wing nuts as well that would be nice. My cab for some reason did not have these when I got them. Please pm me if u have a pair and what u need for them. Thanks!
 
I have these Nintendo parts available.

I would really like to sell them as a lot though.
 

Attachments

  • Nin%202.jpg
    Nin%202.jpg
    93 KB · Views: 26
  • Nin%203.jpg
    Nin%203.jpg
    91.8 KB · Views: 21
  • Nin%201.jpg
    Nin%201.jpg
    94.5 KB · Views: 18
Vader,

If you're using the 4-board stack you want the shorter L-brackets. If you need measurements I can get those.

bhamarcade,

Let me know if you'll sell those carriage bolts seperately!
 
Vader,

If you're using the 4-board stack you want the shorter L-brackets. If you need measurements I can get those.

bhamarcade,

Let me know if you'll sell those carriage bolts seperately!

No, he should need the LOOONGER L brackets for the 4 board stack, right? And he needs the wingscrews too.
 
No, he should need the LOOONGER L brackets for the 4 board stack, right? And he needs the wingscrews too.

Winner winner, chicken dinner.

4-boards use the longer L-brackets. I wouldn't really expect any to turn up (since they're cabaret and early upright-specific), so I'd look at fabbing something similar. But I hope you find some anyway.
 
Yes, longer! Sorry. The 4-board L brackets are approximately 3&1/2 inches long (3/4 of an inch longer than the 2 board L brackets). It looks like he might have one in the picture.
 
Back
Top Bottom