WTB: DK/DK Jr./DK3 metal PCB bracket/board

KaBoom1701

Well-known member

Donor 5 years: 2017-2018, 2020-2021, 2024
Joined
Sep 29, 2017
Messages
12,041
Reaction score
8,537
Location
YUCAIPA, California
Rating - 100%
81   0   0
Going to try this again.

Just need the metal bracket/board that holds the 2-stack PCB's for a DK, DK Jr. or DK3....

Hopefully someone has one laying around. :)
 
DK and DKjr came mounted on the plates, but I've never seen DK3 mounted on a plate. Those PCBs are treated the same as Popeye and go inside an RFI cage. Not saying it can't be done, but they didn't come from the factory that way.
 
Just wanted to wish you luck with your search.

Seems like there is someone looking for one of these about every couple weeks around here.

I'm surprised someone hasn't attempted an interest thread on reproducing this one yet.
 
DK and DKjr came mounted on the plates, but I've never seen DK3 mounted on a plate. Those PCBs are treated the same as Popeye and go inside an RFI cage. Not saying it can't be done, but they didn't come from the factory that way.

I just checked the board and they are the same. I'm trying to make all three the same so I can mount them in the cab with the same heights and keep and OEM look.

Just wanted to wish you luck with your search.

Seems like there is someone looking for one of these about every couple weeks around here.

I'm surprised someone hasn't attempted an interest thread on reproducing this one yet.


I agree. I repo of these boards wold be great.
 
I have a two slot metal cage if that's what you need. That's what my DK3 is in.

Pretty sure the OP is looking for the metal mounting plate seen in this picture:

dk_4pcb.jpg
 
I have a two slot metal cage if that's what you need. That's what my DK3 is in.

Thx but Yeti is correct. Looking for the DK, DK Jr. metal mounting plate. I know the DK3's did not come this way but I'd like to have all three boards mounted the same in my cab.

Pretty sure the OP is looking for the metal mounting plate seen in this picture:

dk_4pcb.jpg


Correct. :)
 
I would be in on a repo if someone made it. I'm looking for one myself

I just checked the board and they are the same. I'm trying to make all three the same so I can mount them in the cab with the same heights and keep and OEM look.




I agree. I repo of these boards wold be great.
 
Anyone?

Just need this last piece to complete my full DK set up.

Hopefully someone finds pity on me and can offer one up. :)
 
Last edited:
That sounds cheap to me. Those extra mounting metal tabs cause these not to fit in regular post office boxes. I always found them to be a huge hassle to ship, which is probably why many of them are removed from boards before shipping.

Ya he's in California too so expensive for me, I figured I'd throw it out there don't really care if i sell mine or not but maybe someone will offer him one cheaper and get the ball rolling so he can find one :)
 
That sounds cheap to me. Those extra mounting metal tabs cause these not to fit in regular post office boxes. I always found them to be a huge hassle to ship, which is probably why many of them are removed from boards before shipping.

Which is why I was hoping to find one for cheap. Lol
 
Well, I already have a DK jr board set....

Guess I could always go this route and then sell mine...

Let me think it over..
 
Back
Top Bottom