WTB - Defender Parts

I compared your measurements to my cab, it appears the height of the opening for the black coin door is maybe a little over a half inch larger. Does that sound reasonable?
 
I compared your measurements to my cab, it appears the height of the opening for the black coin door is maybe a little over a half inch larger. Does that sound reasonable?

I remember measuring this out once. The silver door isn't supported in the original opening for a black door.
Silver doors don't have a one-piece frame, they use 4 individual metal pieces that bolt to the wood.


You'd need to cut & stencil/paint a new face, or cut the original hole wider & scab in additional wood in the top/bottom (not really sure if that'd support the frame pieces, though).


I've been letting the game boards burn in for a while. The right side of the screen developed a line in it. Haven't dug into it, just thought I'd update you:

IMG_2318.jpeg


And, a picture of it all together:
(the coin door harness is still on the door. I'll pull the wiring harness off the silver coin door before I send it.)
IMG_2322.jpeg
 
Last edited:
Back
Top Bottom