WTB: Converted Spectar / TARG Mini CP

Scott C

Well-known member

Donor 3 years: 2022-2024
Joined
Apr 15, 2009
Messages
9,722
Reaction score
1,811
Location
Missouri
Rating - 100%
68   0   0
Picked-up a converted Spectar / Targ Mini cabinet that is missing the CP. If anyone has a cheap, converted CP, please let me know. I may also be interested in a non-converted (IE. still original) CP depending upon cost.

Scott C.
 
Picked-up a converted Spectar / Targ Mini cabinet that is missing the CP. If anyone has a cheap, converted CP, please let me know. I may also be interested in a non-converted (IE. still original) CP depending upon cost.

Scott C.
Bump......

Scott C.
 
I wish I had an extra for you. :(

BTW did anyone ever do a CPO for these? I can't remember if they're screen printed or an overlay.
 
I wish I had an extra for you. :(

BTW did anyone ever do a CPO for these? I can't remember if they're screen printed or an overlay.

They're an overlay, and I don't think anyone has made them.

Tough part to find, you might want to think about fabricating one. They're very simple, just a flat piece of aluminum with the one bend at the front, and it screws into the cabinet.
 
They're an overlay, and I don't think anyone has made them.

Tough part to find, you might want to think about fabricating one. They're very simple, just a flat piece of aluminum with the one bend at the front, and it screws into the cabinet.

Is your aluminum. Im pretty sure the one on my Spectar is steel.
 
They're an overlay, and I don't think anyone has made them.

Tough part to find, you might want to think about fabricating one. They're very simple, just a flat piece of aluminum with the one bend at the front, and it screws into the cabinet.
I agree I may have to fabricate one. If anyone can trace their CP, so I can get the correct bend/shape, that would definitely help. [emoji41]

Scott C.
 
Mine looks like aluminum, but it's brushed steel. Magnets stuck to it.

And if you don't find one, I can trace it for you. It is quite simple like they said. Just a bend and some holes punched.
 
Mine looks like aluminum, but it's brushed steel. Magnets stuck to it.

And if you don't find one, I can trace it for you. It is quite simple like they said. Just a bend and some holes punched.
Tracing on paper you can mail me would be great. I need something very accurate to give the metal shop for the bend. Also, need to know the thickness of the metal (steel, correct?).

Scott C.
 
Tracing on paper you can mail me would be great. I need something very accurate to give the metal shop for the bend. Also, need to know the thickness of the metal (steel, correct?).

Scott C.

Hey Scott! I can measure it this weekend.

RedlandMan, how are you going to put the holes in it?
 
Im not opening any holes as I'm going to get this one to Scott. Not sure what he's going to build with that cab. But if i was making holes in it id use this.
 

Attachments

  • Z1yysvfo5oy.jpg
    Z1yysvfo5oy.jpg
    23.5 KB · Views: 10
Just had one done at metal shop
That looks great and will look great on my cabinet. I'll PM you to continue the discussion.

If you have detailed dimensions from the metal shop, I'm sure other will appreciate seeing those. Combined with the great info from hisnice, anyone should be able to have these made.
Thanks to you both for your efforts.

BTW, I already have a set of hole punches. A must for any new, repro panels.

Scott C.
 
Back
Top Bottom