WTB: Coin Controls reject buttons and bezels.

Yotsuya

Well-known member

Donor 2015
Joined
Nov 18, 2010
Messages
4,214
Reaction score
586
Location
Phoenix, Arizona
Rating - 100%
32   0   0
WTB: Coin Controls or Williams' style coin reject buttons and bezels.

Looking for a standard set of red Coin Controls reject buttons with the matching bezel. I could buy them new but don't want to spend over $25 shipped for these items if I don't have to. Thanks.
 
Last edited:
What style? The ones with the slot integrated into the reject button, or the ones where the slot is made between the bezel and button?
 
Also note there are two sizes of those (slot and button) reject buttons as well.

Thanks for pointing that out, KrisK. I have a Moon Patrol with what appears to be the original Williams coin door. Those buttons look a tiny bit different than what my other Coin Controls door look like, so I figured I'd replace the whole top part as opposed to just the buttons.

I just need one Williams' style reject button, actually, if someone has one of those. Thanks.
 
Here's a photo of what I am looking for. Notice that front is missing the piece that covers the insert. I need this whole button. That would be optimal to swapping out the whole part.
 

Attachments

  • 20130104_222204.jpg
    20130104_222204.jpg
    99.8 KB · Views: 16
  • 20130104_222222.jpg
    20130104_222222.jpg
    99.4 KB · Views: 26
Yes please. Although I think that Bob sells them.

The reject buttons Bob sells are the smaller ones. I know from personal experience they do not fit all coinco doors (in this case they were too small for an original door off a Centipede)

I can post a picture of the diff if anyone is really interested.
 
The reject buttons Bob sells are the smaller ones. I know from personal experience they do not fit all coinco doors (in this case they were too small for an original door off a Centipede)

I can post a picture of the diff if anyone is really interested.

This it?

Says they are for Coin Controls.
http://na.suzohapp.com/cc/42315700.htm
 
Just a follow up- I bought the buttons I found at pinballlife.com, but they're too big. A KLOVer is helping me out with one he had, but I don't think any place sells these specific ones.
 
Back
Top Bottom