WTB: Carnevil or Blitz PCB (Midway Seattle)

mreichel

New member

Donor 2016
Joined
Nov 15, 2013
Messages
9
Reaction score
0
Location
Indiana
Rating - 0%
0   0   0
Hi - I have a Carnevil with a bad PCB. Looking to replace it with one that works. Please message me if you have a working Midway Seattle board, preferably a Carnevil PCB, but a Blitz would (should) do. Thanks.
 
blitz does not use the gun input connector. there is a chance it might not work on that board. They may not have populated some parts. unless you know 100% its going work, you might want to look at the drivers that use seattle boards.

California speed. hyperdrive and vapor trx probably would work, but they are 200mhz pcbs.
 
Back
Top Bottom