Found or No Longer Wanted WTB: Burger Time control panel

Patrick Verner

Well-known member

Donor 2019
Joined
Mar 14, 2019
Messages
754
Reaction score
1,083
Location
Waupaca, Wisconsin
Rating - 100%
4   0   0
I tried to restore the original control panel, but my local professional welder destroyed it. I really only need the main metal CP, but if you have a complete one I guess that's what I'll buy.
 
He kept welding on it and pounding flat with a hammer. It's all pitted up. If you lean on the panel is flexes down and randomly pops back up. That will cause the CPO to come unstuck. The buttons are also stretched out so far I'll have to dremel them out. They are so ovaled out the buttons no longer cover them 100%. He should have known it was a problem right away and just told me he couldn't do it.

If I can't find another one I'll just buy a blank from Mike's arcade.
 
He kept welding on it and pounding flat with a hammer. It's all pitted up. If you lean on the panel is flexes down and randomly pops back up. That will cause the CPO to come unstuck. The buttons are also stretched out so far I'll have to dremel them out. They are so ovaled out the buttons no longer cover them 100%. He should have known it was a problem right away and just told me he couldn't do it.

If I can't find another one I'll just buy a blank from Mike's arcade.

Could have sworn i had one. I looked around and turns out it was a galaga panel. :(
 
Back
Top Bottom