WTB: Bally 5000 parts

wrongdon

New member
Joined
Jan 1, 2010
Messages
481
Reaction score
1
Location
wellington, Ohio
I have a few Bally 5000 plus slot projects in need of some parts.
2 power supplies
2 cpu boards
1 the board under the reels.
Also i am reading about clear chips that are needed from time to time , i have a eprom programmer if anybody has the images.And one of those keyboards if they are required in a home use setting for set up.
Thanks for the help guys, this is my first attempt at slots and i jumped right in and bought 3 projects.
 
come check out newlifegames.net . the best forumn for slot parts, all the vegas techs hang out there. I recently did a couple 5000 projects. You need to replace the batterys always. As for the clear chips you might not need them. did you try removing the I/o board, powerup, hold in pseudo coin button till you see "CH" then keep holding till "cl" (clear), then shut down, push i/o board back in, then power up ?
 
Haha i have not tried anything yet as none of these are complete , tomorrow i will combine all the parts to have one complete unit and see what it does.I have a service manual on the way so that will be a big help. I just figured i would start rounding up parts so i can get them all running.
Thanks for the tip on newlifegames , i'll go see what there is to see.
 
I'm not finding much love for these slots out there , they must have been the black sheep of the bally family.
Most of the places i am contacting for parts for the 5000 and the 5000 plus slots want part numbers .
Being as my parts are missing i don't know them. Surprisingly the manual does not list them .Does anybody know the numbers for:
mpu / cpu
sound board
message center assembly
reel control board
hopper control board
I will need these for both s5000 and s5000 plus machines.
Thank you
 
I"M YOUR HOOK UP !

I will get all the extra parts I have and give you a package deal on what you need. Check back later today.

Dave.




I'm not finding much love for these slots out there , they must have been the black sheep of the bally family.
Most of the places i am contacting for parts for the 5000 and the 5000 plus slots want part numbers .
Being as my parts are missing i don't know them. Surprisingly the manual does not list them .Does anybody know the numbers for:
mpu / cpu
sound board
message center assembly
reel control board
hopper control board
I will need these for both s5000 and s5000 plus machines.
Thank you
 
Haha , the backplane board is about the only board in these things.
Your not too far away so shipping shouldn't be too bad , about the only heavy part i could use would be a hopper or two.
You can send the pics to [email protected] If it is easier than here.
 
Haha , the backplane board is about the only board in these things.
.

Not really. THere are also the MPU, I/O pcb, reel control pcb, Hopper control pcb, pseudo coin pcb ( on door ). I've since sold my Bally 5000 plus and have all these extra parts.

I also have the programming keypad and a set of clear chips if you need them.

I have the operators manual as well as the senior technicians manual ( thick ).

Hoopers are VERY HEAVY and bulky. I shipped one to Texas a few months back and it ran around $32.00 USPS.

Pics coming up in a bit. Stay tuned.
 
Oh yea i meant that the backplane board is about the only board in my machines..they have been molested for parts pretty bad...
 
Here's the COMPLETE inventory of what I have for the Bally 5000- 5000PLUS series Slot. Pick what you want/need and I'll give ya one helluva price. All items sold AS-IS, most items ( 90% of them ) complete, some may be missing parts.

QTY ITEM
=== ========================
1 CC-62 COIN COMPARITOR
1 POWER SUPPLY
1 Jackpot BELL
6 REEL MOTORS
6 "3-LINE PAY" REEL STRIPS
3 " BLACK & GOLD " REEL STRIPS
3 BALLY 5000 MPU BOARDS
1 BALLY MPU BOARD ( has many empty sockets, parts pcb )
5 HOPPER CONTROL PCB
1 5000 Series PSUDO COIN PCB
1 BALLY 5000-5000PLUS SET of CLEAR CHIPS
1 PROGRAMMING KEYPAD ( I paid $ 79.00 for it, will take considerably less )
2 HOPPERS ( Very heavy )
2 REEL CONTROL PCB
1 5 cent WHEEL SHELF ( for hopper to use nickles )
1 TROUBLESHOOTING & TECHNICIANS MANUAL ( Many, many pages )
1 OPERATOR INSTRUCTION MANUAL
2 BACKPLANE PCB
1 Blue LED DISPLAY MESSEGE CENTER
2 PULL HANDLE ASSEMBLY ( bulky and also heavy ) with solenoids
1 Bally 5000 PLUS Control Panel with buttons

Dave
[email protected]
 

Attachments

  • 5000PARTS.jpg
    5000PARTS.jpg
    54.4 KB · Views: 13
Here's the UPDATED inventory of what I have for the Bally 5000- 5000PLUS series Slot. Pick what you want/need and I'll give ya one helluva price. All items sold AS-IS, most items ( 90% of them ) complete, some may be missing parts.

QTY ITEM
=== ========================
1 CC-62 COIN COMPARITOR
1 Jackpot BELL
6 REEL MOTORS
6 "3-LINE PAY" REEL STRIPS
3 " BLACK & GOLD " REEL STRIPS
2 HOPPERS ( Very heavy )
2 PULL HANDLE ASSEMBLY ( bulky and also heavy ) with solenoids
1 Bally 5000 PLUS Control Panel with buttons

Dave
[email protected]
 
Bally 5000 parts

Check with Rec Room Specialties Co. Toledo Ohio They have parts for 5000-6000 machines. Phone can be found on their web sight.
 
Back
Top Bottom