WTB Baby Pacman Spinners

cwstrong

Member
Joined
May 21, 2008
Messages
110
Reaction score
0
Location
LONGWOOD, Florida
I'm in need of some Baby Pac spinners since they are missing from my machine. Is there a generic spinner that will fit the Baby Pac or is it a custom size? I've found resources for the artwork, so that's not an issue.

Thanks in advance for any help.
 
pretty sure pbresource has some generic white spinners. i remember when i was ordering parts for mine, i asked and they had some but without the decals on them.

i was just going to get some of that decal printer paper and see if i could just make my own decal. i belive the artwork is on local arcade. if not, i know i have seen it somewhere.

anyways, i ended up not ordering them and had just planned on repainting mine white. never did though.
 
pretty sure pbresource has some generic white spinners. i remember when i was ordering parts for mine, i asked and they had some but without the decals on them.

i was just going to get some of that decal printer paper and see if i could just make my own decal. i belive the artwork is on local arcade. if not, i know i have seen it somewhere.

anyways, i ended up not ordering them and had just planned on repainting mine white. never did though.

I have some high resolution artwork from a fellow KLOV member if anyone needs it. It is a PSD file.

Edit: Will take some measurements when I am sober..

-VJ
 
Last edited:
1.27 tall x 1.51 wide. Or most likely 1 1/4 x 1 1/2". Single bends, about 2 1/4" between the first bend on the "axle". The leaf arm hooks directly to the axle.
#515-5236-00 that marco has appears to be correct, from scaling their pic.
 
somebody had those decals for the spinners, but i can't find them now either.
 
somebody had those decals for the spinners, but i can't find them now either.

It seems like it was someone on here that just printed them. I know the PSD file I have (attached) is from a fellow KLOV'er. Can't remember which one right now... Possibility Zork40, but there were several guys restoring at the time.

Oh, and thanks for measuring the spinner so that I didn't have too! :)

-VJ
 

Attachments

  • baby_pac_spinner.psd.zip
    39.7 KB · Views: 28
It seems like it was someone on here that just printed them. I know the PSD file I have (attached) is from a fellow KLOV'er. Can't remember which one right now... Possibility Zork40, but there were several guys restoring at the time.

Oh, and thanks for measuring the spinner so that I didn't have too! :)

-VJ

yw. It could've been someone on here printing them, i've lost track. Thanks for sharing the file, though - i may make up some new ones for mine. They look a bit tattered. Heck, i could probably get by with some white touch up paint truthfully.
 
yw. It could've been someone on here printing them, i've lost track. Thanks for sharing the file, though - i may make up some new ones for mine. They look a bit tattered. Heck, i could probably get by with some white touch up paint truthfully.

No problem. Oh, this reminded me I had a decent picture of a NOS spinner that was on ebay.
 

Attachments

  • bpspin1.jpg
    bpspin1.jpg
    96.1 KB · Views: 18
1.27 tall x 1.51 wide. Or most likely 1 1/4 x 1 1/2". Single bends, about 2 1/4" between the first bend on the "axle". The leaf arm hooks directly to the axle.
#515-5236-00 that marco has appears to be correct, from scaling their pic.

Thanks for everyone's input on this! :)
 
Back
Top Bottom