WTB - Atari Road Riot Shaker motors

KevinMullins

Active member
Joined
May 27, 2009
Messages
2,187
Reaction score
10
Location
Mcloud, Oklahoma
Rating - 0%
0   0   0
Need two if possible as mine are both missing.
FYI - These are not found in the "kit" machines.

Motors like seen here in this picture.
 

Attachments

  • Steering shaker.jpg
    Steering shaker.jpg
    21.8 KB · Views: 20
See if these come up with anything -

1450008-001
Motor 12 Vdc (Globe)

049453-01
.156 Inch Dia. Hole Counterweight


The rest of the parts are really just misc hose clamps and screws and such I'm sure I could get locally.

178244-220
Hose Clamps x 2

72-8812
8-32 x 3/4 Long Socket Head Cap Screw

177010-238
8-32 Polymer Hex Lock Nut

I'm pretty sure all the mounting brackets and such are still there, been years since I looked though. If I recall it looked as if the motors were just removed for whatever reason. (dead maybe)
 
This is only on the uprights isn't it?

It's only on the DEDICATED units.
Most uprights I have seen are "kits" which does not include the shakers.

My twin sit-down unit is suppose to have them, they've just been removed for whatever reason.
(counterweights probably killed the motor bearings)
 
I have NOS counterweights. Still looking for the motors.

No rush, just let me know what ya find.

This is just one of those "just because" things..... not like there's a market for restored Road Riots or anything. :)
Kids play the heck out of it anyways.
I was only looking for the shakers because they're "suppose to be there".
 
It's only on the DEDICATED units.
Most uprights I have seen are "kits" which does not include the shakers.

My twin sit-down unit is suppose to have them, they've just been removed for whatever reason.
(counterweights probably killed the motor bearings)
The sitdown one I had didn't have them. It does have an actuator that hits your seat everytime your car is shot though.
 
The sitdown one I had didn't have them. It does have an actuator that hits your seat everytime your car is shot though.

That's the exact scenario I have now as well.

Has the seat knockers, but not the steering shakers.
Been awhile since I've opened mine up, but I'm certain the wiring harness and power distribution board (solenoid/motor pcb) is there for the steering shakers as well.

It's all listed in the full operators manual for the twin sitdown.
http://arcarc.xmission.com/PDF_Arcade_Atari_Kee/Road_Riot/Road_Riot_4WD_TM-369_1st_Printing.pdf
 
Back
Top Bottom