WTB: Atari over/under coin door (coin controls)

chris25810

Well-known member
Joined
Oct 3, 2006
Messages
7,103
Reaction score
68
Location
lake elmo, Minnesota
Rating - 100%
178   0   0
I'm looking for one of these (82-83 era) that still has a nice, shiny, untarnished zinc plating on the inside, this is a must. I don't really care if the mechs are gone as long as all the wiring, coin triggers, lighting and red reject buttons are all there. As far as the outside finish goes,i don't care how that looks either but both doors must be straight and 100% dent free.

All i need are both doors with the frame, no coin box or the big ass container that holds the box are needed.
 
Anybody else wanna try? This is going into a very expensive restoration so i'm not kidding when i say i want all the innerds nice and shiny. The correct color of all the inner pices should be gold and the reject buttons red.
 
Awwww...MAN! I just mailed my Food Fight coin doors out to California. Had I known you were looking, Chris, I would have DONATED them to your cause.

Bummer. Keep me in mind if you need other stuff, though!
 
Anybody else wanna try? This is going into a very expensive restoration so i'm not kidding when i say i want all the innerds nice and shiny. The correct color of all the inner pices should be gold and the reject buttons red.

If you're going all out, don't rule out having the pieces replated. Mike Chestnut is popular on RGP. I had some Stern coin door parts and Bally playfield parts chrome plated and he was very reasonable. He may be able to do the gold type plating.
 
Back
Top Bottom