WTB: Atari F-1 Steering Wheel

ataritoobin

Active member
Joined
Apr 16, 2005
Messages
1,946
Reaction score
21
Location
California
Rating - 100%
66   0   0
Looking for an Atari/Namco F-1 Steering Wheel with grip intact. Attached are a couple of pictures. It has a matte nickel-ish looking finish, and is about 10" from edge to edge (might be closer to 11 since the foam is obviously shot on mine!)

This one has "S.S. Limited" stamped on the back.

Thanks!
 

Attachments

  • Wheel1.jpg
    Wheel1.jpg
    40.8 KB · Views: 14
  • Wheel2.jpg
    Wheel2.jpg
    53.9 KB · Views: 8
Last edited:
I'll keep my eye out, I think I have an indy 500 steering wheel that looks similar but have access to maybe several different ones. Let you know this weekend.
 
Not the same steering wheel, but I have a contol panel off lemans(not a pic of mine, but for reference)

ControlPanel.jpg
 
Last edited:
Thanks, guys!

I should also note that it's substantially more shallow than the Superior Performance "The 500" wheels, this one is 2" deep.

Looks like S.S. is still in business in Japan, but doesn't make anything like this anymore.
 
I have two F-1s.. The keeper machine has a "500" on it and it looks factory; if it isn't original, it's been on there since the 70's and looks & plays fine.
I've never really touched the second F-1 and it has the same wheel with the foam covering, it's not as bad as yours but still not in acceptable condition. (if anybody wants a complete F-1.. $150)

I'd say just stick a 500 on there.
 
Last edited:
I have two F-1s.. The keeper machine has a "500" on it and it looks factory; if it isn't original, it's been on there since the 70's and looks & plays fine.
I've never really touched the second F-1 and it has the same wheel with the foam covering, it's not as bad as yours but still not in acceptable condition. (if anybody wants a complete F-1.. $150)

I'd say just stick a 500 on there.

Thanks for the info. Arg - wrong coast or I'd take you up on that !
 
Back
Top Bottom