WTB: Atari Dig Dug Marquee Brackets

Maxwell

New member
Joined
May 1, 2015
Messages
7
Reaction score
10
Location
Texas
Rating - 100%
1   0   0
I am looking for the upper and lower Atari Marquee Brackets for a Dig Dug Upright cabinet. I believe other Atari cabinet marquee brackets would work as well, for example Centipede, Food Fight, Kangaroo, or Arabian.

Part Numbers
Upper Bracket: 036498-01
Lower Bracket: 003053-01
 
I am looking for the upper and lower Atari Marquee Brackets for a Dig Dug Upright cabinet. I believe other Atari cabinet marquee brackets would work as well, for example Centipede, Food Fight, Kangaroo, or Arabian.

Part Numbers
Upper Bracket: 036498-01
Lower Bracket: 003053-01
I don't have these, but I do have the screws
 
Have you considered fabricating your own from angle aluminum or steel from a hardware store? If you're up for trying something like that, I can get you detailed measurements from my Centipede cabinet.
 
Have you considered fabricating your own from angle aluminum or steel from a hardware store? If you're up for trying something like that, I can get you detailed measurements from my Centipede cabinet.
Hello Charlie, I am actually working with a friend to try to 3D print some plastic ones to use as a temporary stop gap until I can find something from an original cabinet. I tried my best to provide him with some schematics by measuring the screw holes in my cabinet, but if it is not too hard for you to measure yours from your Centipede that would be great. I had not considered trying to make them out of aluminum or steel. Do you have a video on how to do that?

I am currently rebuilding the base of my Donkey Kong using one of your recent videos as a guide. They are great!!!
 
Back
Top Bottom