Found or No Longer Wanted WTB - Atari Coin Controls over/under coin door (specifically for Pole Position) w/harness

Onji

Well-known member

Donor 3 years: 2018, 2022-2023
Joined
Sep 13, 2013
Messages
1,687
Reaction score
2,448
Location
Monroe, Louisiana
Rating - 100%
23   0   0
Hi. Looking for an Atari Coin Controls over/under coin door. This will be for a Pole Position. Will need the harness still attached.

I do not need the big coin vault or utility panel.

Thanks
 
These are everywhere when you don't need them lol

Just fyi, not concerned with condition as long as all of the pieces are there.
 
Last edited:
I'll pick one for you from my stash soon. Just give me some time. I will PM you or post here when i have everything ready.
 
Did a quick check and yes I have everything to make a complete coin controls coin door except the plastic lower return bezels and return flaps. I have a stack of coin doors in various stages of restore and have a nice looking coin door skin and found a matching set of upper and lower mech holders that still have the yellow nickel (Cadmium) plating on them. Twisted Quarter has the best price on these plastic lower bezels and return flaps but they have the worst price on shipping so i usually wait until i have all my coin doors cleaned up before i make a large enough order to justify their ridiculous shipping rate. I haven't been able to work on any recently as its been raining off and on for weeks.

Anyway. I have the coin mech holder parts in my garage and its been raining non-stop. I will get you some pics when it stops raining a bit. You can pay whatever for this or nothing at all. I just ask that you pay for shipping to you.
 
Wow Don. I really appreciate this. For the missing parts I may be able to steal from a regular sized door if they're interchangeable. If not I'll go with with your twisted quarter links.
Yes I'm definitely interested. Very generous offer. We'll figure out specifics.
 
Some good news and some not so great news here.

I found what I believed to be a completely unmolested door. Turns out someone gave it a quick code of gloss black. It's still does look nice all things considering and the picture doesn't do it much justice. If you want something nicer I definitely do have more doors however they have all been stripped and refinished. the finish was done with truck bed liner. While they do look nice and clean, they look nothing like the original finish.

Secondly, I thought I had some original, untouched mech holder hardware but after looking around I realized they are not complete. I do have some nicely cleaned up parts here that were cleaned, stripped and sprayed with a matte nickel finish.

I did find some plastic upper reject bezels but in the process of looking I found a complete set of metal reject bezels which are period correct for early titles such as pole position. They have been stripped and do need a coat of gloss black paint. You can have either set.

Last but not least I did find one more game board style large USPS flat rate box. After doing some searching I found that they no longer distribute these boxes but they will honor them as legitimate flat rate boxes if you use the last remaining boxes. This will save you on shipping considering these weigh quite a bit.

Tldr; this or whatever you want for the cost of shipping
 

Attachments

  • 20250809_151953.jpg
    20250809_151953.jpg
    370.8 KB · Views: 4
  • 20250809_154230.jpg
    20250809_154230.jpg
    442.8 KB · Views: 4
Back
Top Bottom