WTB: ASTEROIDS Coin Door with wiring

coinopshop

Well-known member

Donor 2020, 2023
Joined
Apr 3, 2008
Messages
2,157
Reaction score
407
Location
Forty Fort, Pennsylvania
Rating - 100%
54   0   0
Hello.

I am looking for a coin door with the wiring and molex plug still attached for an Atari ASTEROIDS upright. Doesn't need to be pretty.....

Dave
COINOPSHOP ( in PA 18704 )
 
Prefer the "Owl Eye" but...will settle for the non-owl type. Either one MUST HAVE coin door wiring intact.

Dave
COINOPSHOP

You know that those two door's are wired different.....right? The Owl eye uses the white plastic molex connector and the newer style uses the black AMP plug so make sure you know what plug is on your Asteroids wire harness or your going to be dissapointed :)
 
You know that those two door's are wired different.....right? The Owl eye uses the white plastic molex connector and the newer style uses the black AMP plug so make sure you know what plug is on your Asteroids wire harness or your going to be dissapointed :)

Mine definately has a black plug for the coin door. So a "non-owl" style is what I need. Thanks for the info, I didn't realize they were different.

Dave.
 
It's not to tough to make an adapter if you what to use the owl eye coin door. I did it for mine. The drawing on how its wired is in the Asteroids schematics but I'll attach it here also.

-------
you also need to get a test switch that will mount by the volume pot since the owl eye doest have the switch on the coin door
 

Attachments

  • asteroid coin door adapter.JPG
    asteroid coin door adapter.JPG
    47.1 KB · Views: 7
Last edited:
Back
Top Bottom