I am looking for the wiring that connects an Amplifone HV board to the neck of the CRT. This harness consists of the wires, neck socket and in-line resistors. I'd be willing to buy a trashed board with an intact harness.
According to dez's site, he has 3 of his repro neck connectors in stock. Might want to consider adapting your current setup to use one of those : http://www.amazingarcading.com.au/
"Neck Connector 11 pin and PCB with 6KV Focus wire joined - $30"
I have some neck boards made up ready, and about 10 more I can make up as required.
I also hold spare plugs and pins to suit harnesses. I just am not a fan of making harnesses, so you will need some 18 gauge wire to wire all the bits up