WTB 33" monitor chassis

Holleywierd

New member

Donor 2014
Joined
Aug 15, 2010
Messages
330
Reaction score
1
Location
Silverdale, Washington
Rating - 100%
18   0   0
Looking for a good 33" monitor chassis only. I have a good tube from what I can tell. Current one Im using is a pentranic ch-288. Heard a wg d9200 would work great though. If anyone is familiar with one and has something compatible please pm me, thanks!
 
The size of the monitor isn't the only compatibility check. The socket on the neck board needs to match the tube and the chassis needs to be compatible with the impedance of the yoke.
 
Thanks, Im not that familiar yet with monitors. Is the impedence listed on a chart anywhere perhaps or will I need to have some sort of electrical probe?
 
You check the yoke with an ohm meter. I haven't found a chart anywhere for this. You will need to know the resistance measurement of the yoke you are using and the yoke from which the donor chassis comes from. They don't have to be exact, but should be close. Search on here for threads about the yoke or testing and you should find a bunch of information.
 
Back
Top Bottom