WTB: 25" WG K7000 neck board or non-working 25k7000 chassis

shardian

New member
Joined
Sep 13, 2007
Messages
8,762
Reaction score
8
Location
Culloden, West Virginia
Rating - 100%
11   0   0
WTB: 25" WG K7000 neck board or non-working 25k7000 chassis

As title states, looking for a neck board for a 25" Wells Gardner K7000 chassis.

Also in the market for whole non-working k7000 chassis if I don't have luck with a neck board.
 
neck

i am sure i have what you need. I will look in awhile and let you know.
 
neck boards

old 7000 series is way different then the newer 7400, 7500 series. which board do you have then. does it say on the neck board.
 
Yes, I am aware that a 7400 might as well be a different chassis. WG just plain sucked with their numbering system.

What I have here is a monitor that is missing the neckboard. I do not have it 'in-hand'. It is at a friend's house and I'm operating off of 2nd hand info and a few pics.

This is most definitely a 7400. If I can pull from multiple monitors that use the same neck board, then I have a much better chance of getting what I need. That's the info I am looking for.
 
Back
Top Bottom