Found or No Longer Wanted WTB: 2-way Wico Joystick or Joystick Base

Druid

Well-known member
Joined
Jun 10, 2024
Messages
285
Reaction score
301
Rating - 100%
28   0   0
Looking for one for a Tutankam control panel. Any condition.


01.jpg
 

Attachments

  • 02.jpg
    02.jpg
    260.8 KB · Views: 3
Last edited:
One will show up someday. Right?... Right?...
 
I have one. I'll have to take it out see the condition. I know it's missing the sticks, but it still has both joy bases, a plexi overlay with about an inch and an half missing on one side and the wiring harness is still intact.
 
nos base but only have a joystick, missing plastic actuator, clip
 

Attachments

  • 20250802_164412_HDR[1].jpg
    20250802_164412_HDR[1].jpg
    395.3 KB · Views: 8
  • 20250802_164420_HDR[1].jpg
    20250802_164420_HDR[1].jpg
    339.9 KB · Views: 8
@nuterpacman Thanks for posting! I am definitely interested in making you an offer on your base, but I want to make sure that the top section has an elongated hole like the one in the my first post. (It is hard to tell from your photo since it is at an angle.) No need to take another picture, I'll take your word for it.

The reason I am asking is because I bought one of these from another KLOVer a while back and the top section has a round hole in it. I assumed it somehow got mismatched during it's life, but if yours is round too, then I am wondering if some came out of the Wico like that??
 
Here are pics of the top and bottom of the panel and the bottom of the 2-way base. I can just sell you the 2-way base. I'd rather keep the panel as I'll be pilfering leaf switches and the Wico base from it. Tonight I will take it off the panel and see if it's got the slot you're asking about. This was original from my first Tut, and nothing's been changed or altered that I know of.

IMG_2731.jpeg
IMG_2732.jpeg
IMG_2752.jpeg
 
Thanks @Phetishboy! I do prefer to just buy the base and I don't need the switches.

I await word on the top slot with anticipation...
 
Finally got the panel in the garage and pulled the stick base off to see the top. Yep mine has the slot.

IMG_2781.jpeg

And the bottom is only populated with two leaf switches:

IMG_2782.jpeg
 
Back
Top Bottom