WTB 2 1/4" Centipede trackball housing

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Rating - 100%
114   0   0
I just rebuilt mine with new bearings and rollers, cleaned and greased everything and installed a nice (and significant) billiards ball for the roller ball. I did a few test passes on the new ball, started to get the bearings loosened up and rolling free, when I accidentally dropped the damned thing, breaking the plastic arms that old the opto boards in place. What a dumb fuck. If you have a nice empty housing or a dirty complete Centipede trackball, I need it to transfer my new parts to. Thanks.
 
I'm 99% sure I have an old trackball housing I'm not doing anything with. I just moved, so I have to dig it out. Let me check tonight and get back to you.
 
What brand of trackball case are you looking for? I may have a Beston/Imperial laying around.

I just rebuilt mine with new bearings and rollers, cleaned and greased everything and installed a nice (and significant) billiards ball for the roller ball. I did a few test passes on the new ball, started to get the bearings loosened up and rolling free, when I accidentally dropped the damned thing, breaking the plastic arms that old the opto boards in place. What a dumb fuck. If you have a nice empty housing or a dirty complete Centipede trackball, I need it to transfer my new parts to. Thanks.
 
Back
Top Bottom