Wtb - 1945k III asap

modessitt

Volunteer: Encyclopedia Submission Moderator
Joined
Mar 22, 2007
Messages
33,414
Reaction score
325
Location
Austin, Texas
Rating - 100%
24   0   0
Just killed one by busting off a leg of the big surface-mount chip flush with the body and no way to reattach.

I need one working 100%.

Please PM me a price shipped to 78724.

Thanks...
 
can't you just file off the edge of the top part of the chip to get to the leg and put a jumper wire on it? im at work right now but there was a thread recently about this...just a thought
 
I may have to do this, but the pad for the leg is gone and I'd have to figure out where the trace goes, which is under the chip.

But if I can find one for a good price, I'll probably buy it...
 
Bump - it's getting worse. Used the dremel and got down to the pin. Had trouble getting a jumper wire on as I didn't have much exposed. Tried to dremel off some more on the other side of the corner, dremel slipped, and 5 more pins severed. :mad:

I've got two reattached, but I have the wrong tip and no microscope, so I'm having trouble with bridging on the five that are next to each other.

This would be a lot easier if I could get someone to sell me a board...
 
Bump! Need one really bad! Someone has to have one.

Supposedly it's a "ripoff" of Strikers 1945 III, but that game doesn't look the same. Pity, because Strikers 1945 III is available in various places...
 
Any particular reason why you badly need this pcb? I could suggest multiple vertically-oriented shooters in place of it that might be enjoyed more.
 
Any particular reason why you badly need this pcb? I could suggest multiple vertically-oriented shooters in place of it that might be enjoyed more.

Because it doesn't belong to me and it's now broken - when it worked with a minor hum before. I need a replacement for the original owner...
 
Back
Top Bottom