wtb: 19" cut-corner Dynamo CP

mc300baud

Well-known member
Joined
Aug 26, 2006
Messages
3,763
Reaction score
101
Location
Tacoma, Washington
Rating - 100%
27   0   0
drilled for one joystick and 2-3 buttons, preferably ambidextrous. for use on a machine for world record attempts at the NW Pinball and Gameroom Show next month.

i have a CP that's been drilled for 2 joysticks and 5 or 6 buttons per player and i'm looking for something much cleaner than that, though if we have to we could use it.
 
Is the one you have one of those swiss cheese panels that have all the holes, including trackball holes, already cut in it? If so, you can just put a new plexi top on and redrill holes.
 
it's cheap operator swiss cheese so the holes aren't lined up and the joysticks not quite straight... pretty ugly and i don't really want to drill a bunch of additional holes if i can help it.

sounds like we might have another cab available so mine might not be necessary, but i'd still love to have a nice CP for this cab.
 
Ah okay. The type of cp I'm thinking of came pre-drilled from Dynamo, not done by the op. Here is what it looks like (ignore the colored in holes, I was diagramming a Raiden setup for someone). Then you just drill the holes in the plexi you want that line up with the ones on the panel.

.
 

Attachments

  • swisscheese.jpg
    swisscheese.jpg
    30 KB · Views: 15
Pindork1 had this one a few months ago when I was looking for a trackball cp. Give him a shout if that would work.

DSCF0692.jpg
DSCF0693.jpg


.
 
i'd send him a PM but his box is full. if you have an alternative method of contact (e-mail?) please send it to me in a PM. my mailbox isn't full since i'm not that popular.
 
Back
Top Bottom