Would someone take a look at their gorgar sound board for me ?

Deadpool66

New member
Joined
May 21, 2009
Messages
1,839
Reaction score
13
Location
Minnesota
Would someone take a look at their gorgar sound board for me ?

I'm at work and want to order a cap kit for my machine as the sound garbles after about 30min of play. I'm wondering if the cap at c27 is 12000uf or 4700uf.
 
I'm at work and want to order a cap kit for my machine as the sound garbles after about 30min of play. I'm wondering if the cap at c27 is 12000uf or 4700uf.

The schematic shows 12000:

http://www.pinrepair.com/sys37/s67snd.pdf

Most shipped with 4700 and it's just a filter for the +5VDC so an exact value is not critical. Ed sells both the 4700 and 12000 in axial:

http://www.greatplainselectronics.com/products.asp?cat=108
http://www.greatplainselectronics.com/products.asp?cat=109

If in doubt go for the bigger one but I would also consider a beefier BR1 if you go with the bigger cap.

EDIT:
He also sells a kit for that board. Looks like he's out of the 12000. He says they're on order and due in October so maybe send him an email. Either that or go with the kit that includes the 4700.

http://www.greatplainselectronics.com/Category-45.asp
 
Last edited:
that's why I asked because the 12000uf is out of stock. I finally got my Gorgar put back together this weekend and beside this issue its almost 100%.Guess Ill send him an email and just order the 4700uf kit in the mean time.
 
Back
Top Bottom