Working Tron Video Generator Board

Segagee

New member
Joined
Feb 27, 2009
Messages
337
Reaction score
2
Location
South Carolina
Rating - 100%
3   0   0
Looking for a 100% tested and working Tron video generator board, working on fixing mine in the meantime but figured I would put the word out there. Mine has missing sprite issues I can't seem to pin down. Thanks for any leads!
 
Nevermind, got my board working this morning but two of the ROMS are missing/have bent pins >_<. My sprites are showing up but have lines through them now. I took both of them out, ran the board, and it is still doing the same thing.

So now I will be needing the two ROMS below and everything should be up and running (see pic).

Can anyone burn them or know someone who can? Type is 2764-4.
 
Last edited:
"for testing purposes" :D

you could solder new legs on if theres some of the old leg left..

get another ic and chop the legs off, as close to the ic as you can..

put the rom in its socket, shove the new pin down, then solder the two pins togther at the top


I have done this a few times... "and totally didnt leave it that way when it worked" wink wink nidge nudge


im sure somebody could burn you some new roms for this bieotch...
 
Back
Top Bottom